Building Products
Connelly GPM-Inc. is a private labeler of products for building products manufacturers only.
Here is a full list of our building products. For any questions, please contact us.
dummy ignore
FLOOR HARDENERS:
- Natural – Regular and Ready-Mix
- Colored – Ready-Mix
- Plain Iron
- Iron Topping – Ready-Mix
- Light Reflective – Ready-Mix
- Natural – Ready-Mix, Non-Rusting
WATERPROOFING:
- Odorless
- Regular
GROUTING MATERIALS:
- Regular
- Ready-Mix
- Neutral
METALLIC BUILDING PRODUCTS
FLOOR HARDENERS:
- Natural – Regular and Ready-Mix
- Colored – Ready-Mix
- Plain Iron
- Iron Topping – Ready-Mix
- Light Reflective – Ready-Mix
- Natural – Ready-Mix, Non-Rusting
WATERPROOFING:
- Odorless
- Regular
GROUTING MATERIALS:
- Regular
- Ready-Mix
- Neutral
NON-METALLIC BUILDING PRODUCTS
FLOOR HARDENERS:
- Quartz Silica – Natural, Ready-Mix
- Quartz Silica – Colored, Ready-Mix
- Quartz Silica – Light Reflective, Ready-Mix
- Emery – Natural, Ready-Mix
- Emery – Colored, Ready-Mix
GROUTING MATERIALS:
- Non-Metallic Grout, Ready-Mix (#7117)
- Non-Metallic Grout Concentrate (#7ll7)
- Non-Metallic Grout, Ready-Mix, Hi-Flow (#8966)
- Non-Metallic Grout Concentrate, Hi-Flow (#8966)
METALLIC FLOOR HARDENERS
For surface hardening and coloring (if coloring is desired) of concrete floors and surfaces. Consists of specially graded iron aggregate, and when required, cement dispersing agents and alkali-proof inorganic pigments for color. During installation of the base concrete slab or surface, CONNELLY-GPM METALLIC FLOOR HARDENER is incorporated integrally into the cementitious surface of the base concrete. After finishing with standard concrete flooring procedure, CONNELLY-GPM METALLIC FLOOR HARDENER produces a hard, dense, wear-resistant surface that is resistant to absorption of grease, oils, alkalis and most chemicals.
IRON TOPPING
IRON TOPPING is a specially compounded concrete topping material designed for producing a hard, dense, impact and abrasion-resistant floor surface over new construction or old concrete floor slabs. It is composed of specially graded iron aggregate, portland cement, water-reducing, plasticizing and pozzolonic agents.
LIGHT REFLECTIVE METALLIC FLOOR HARDENER
CONNELLY-GPM LIGHT REFLECTIVE METALLIC FLOOR HARDENER is a Ready-to-Use “shake-on” floor surfacing material which is applied to concrete floors during slab installation to produce a monolithic extremely long-wearing surface with the added feature of light-reflectance to enhance and maximize visibility and reduce the energy requirements for uniform and glare-free lighting in the work areas. It consists of specially graded iron aggregates, cement dispersing and plasticizing agents, and alkali-proof inorganic pigments carefully developed to produce a muted white color that maximizes light reflectance while minimizing glare.
NON-RUSTING METALLIC FLOOR HARDENER
In corrosive conditions it is the ideal product for hardening and coloring (if coloring is desired) of concrete floors and surfaces. Consists of specially graded non-rusting iron aggregates and when required, cement dispersing agents and alkali-proof inorganic pigments for color. During installation of the base concrete slab or surface, CONNELLY-GPM NON-RUSTING METALLIC FLOOR HARDENER is incorporated integrally into the cementitious surface of the base concrete flooring procedure. CONNELLY-GPM NON-RUSTING METALLIC FLOOR HARDENER produces a hard, dense, wear-resistant surface, which is resistant to absorption and corrosion of grease, oils, alkalis and most chemicals. In addition, it is non-rusting even after the cement laitance is worn away, leaving the metallic aggregate bare and exposed to the atmosphere and direct contact with chemical contamination.
NON-METALLIC FLOOR HARDENER (Quartz Silica)
Produces hard and colorful new concrete floors and surfaces. Consists of a mixture of finely graded hard quartz silica aggregates and, where color is desired, alkali-proof colors, color fixatives and dispersing agents. During installation of the base concrete slab or surface, CONNELLY-GPM NON-METALLIC FLOOR HARDENER is incorporated integrally into the cementitious surface of the base concrete. After finishing with standard concrete flooring procedure, it produces a colorful, abrasion and chemical resistant surface for use both indoors and outdoors.
LIGHT REFLECTIVE NON-METALLIC FLOOR HARDENER (Quartz Silica)
CONNELLY-GPM LIGHT REFLECTIVE NON-METALLIC FLOOR HARDENER is a Ready-to-Use “shake-on” floor surfacing material which is applied to concrete floors during slab installation to produce a monolithic extremely long-wearing surface with the added feature of light-reflectance to enhance and maximize visibility and reduce the energy requirements for uniform and glare-free lighting in the work area. It consists of specially graded silica aggregates, cement dispersing and plasticizing agents, and alkali-proof inorganic pigments carefully developed to produce a muted white color that maximizes light reflectance while minimizing glare.
EMERY FLOOR HARDENER – NON SLIP, NON-METALLIC – READY-TO-USE
CONNELLY-GPM EMERY FLOOR HARDENER is a mixture of finely graded Emery aggregates selected for hardness and chemical resistance and cementitious binders and admixtures. It also contains, where color is desired, alkali-proof colors of maximum tinctorial strength, and dispersing agents. When applied, CONNELLY-GPM EMERY FLOOR HARDENER is easily worked into the surface to produce an abrasion-resistant and uniformly colored surface with the safety feature of a non-slip surface.
METALLIC WATERPROOFING COMPOUND
For rendering masonry surfaces resistant to water absorption and for reinforcing porous or spalling masonry surfaces. Consists of a finely graded powder of oxidizable iron in either of two formulations: 1) oxidation promoted by ammonium chloride; and 2) oxidation promoted by odorless additives. CONNELLY-GPM METALLIC WATER-PROOFING COMPOUND, when applied as directed, expands upon oxidation filling the pores of the masonry and becoming an integral component of the surface, thereby rendering the surface impervious to water and reinforced against cracking and spalling.
METALLIC GROUTING COMPOUND
METALLIC GROUTING COMPOUND produces a non-shrink cement or mortar grout of high compressive strength and maximum ductility. Consists of especially active iron powders, cement, acceleration promoters, and cement dispersing and lime reactive plasticizing agents. When used as directed, CONNELLY-GPM METALLIC GROUT expands to counteract the natural shrinkage inherent in cement mixes. The resultant dense grout possesses high compressive strength, impact resistance and bond strength to any metallic fastenings cast in place. These characteristics make CONNELLY-GPM METALLIC GROUT ideal for: a) patching and/or resurfacing concrete floors; b) anchoring of bolts, fastenings, etc.; c) grouting of heavy machinery and structural column bases; d) for use around pipe and sleeves in concrete, and wherever a strong, dense, non-shrinking grout is required.
NEUTRAL METALLIC GROUT
Utilizes the best features of CONNELLY-GPM METALLIC GROUT. CONNELLY-GPM NEUTRAL METALLIC GROUT incorporates CONNELLY-GPM’s latest technological advances in shrinkage prevention, corrosion resistance and internal reinforcement for cementitious metallic grouting compounds. It has comparable compression, flexural, impact, etc. strengths as standard CONNELLY-GPM METALLIC GROUTING COMPOUND and a lower, but positive, expansion at all ages. At the same time, it is more fluid and has a longer workability than the standard product.
NON-METALLIC GROUTING COMPOUNDS
Composed of specially selected silica sands, portland cement, pozzolanic, plasticizing, water reducing and shrinkage compensating agents. In CONNELLY-GPM NON-METALLIC GROUTS the combination of ingredients produces high early and 28 day strength and a slight, but positive expansion right from time of placement with no intermediate shrinkage occurring. CONNELLY-GPM NON-METALLIC GROUTS come in two types: a) The standard Non-Metallic Grout #7117 with moderate strength; and b) High-Fluidity Non-Metallic Grout #8966.